Thats a new one on me. What did that do if I may ask? Best I have been able to figure out is that it’s probably IRC related but that’s it.

Canonical? the US could try but Canonical isn’t a US company so far as I know. The attempt would probably just piss off their “home” nation. That would be the UK, I think.

Red Hat is another story though. It’s owned by IBM which is a US company, which means it is, in theory, obliged to obey any lawful order of the US government. I say “in theory” because there is a long history of companies here saying “Yes sir, Yes sir, Three bags full sir.” and then doing whatever they want when no one is looking anymore. For examples see Facebook, Google, OpenAI, Exxon IBM, Coke, Ford and… Well just about every company that has been around for more than 20 years and most small businesses to boot.

Practically speaking, though. These companies are based around open source projects whose source code has been widely distributed. If you need to, (or hell, even if you just want to) fork them, rename the project to avoid trademarks, and move on. Whether you flip Uncle Sam the bird as you do so, your call.

Depends on your threat model, but you’re probably fairly secure from remote unauthorized access right now.

Given that I’m American, I would put the *arr stack behind a dedicated VPN container like gluetun and set Gluetun up using a “no logs” VPN.

For remote access, Tailscale can probably get around that double NAT. If you have it on your devices as well as your server, you won’t necessarily need to expose anything publicly.

If that’s not an option, you could set up an external VPS to run a reverse proxy (Caddy perhaps) and use the Tailscale connection to connect the VPS to your home server. There are fully self hosted ways to do this (Headscale comes to mind), but Tailscale is how I personally would solve this.

Good article, but dear god, either hire an editor, or put it through a spelling and grammar checker. Preferably both.

I would have been surprised if they hadn’t fired her. Good on those two for causing a ruckus for a cause they believe in though. Nonviolent one too, well done.

They load. I have to specify http:// to get it to work though.

I’ve never done it myself but this may be what you’re looking for.

Please! That would be very helpful. I tried but got tired of banging my head against a wall. I’d like to see how you approached it.

I also attempted a semi-successful build of Gentoo on a PPC Mac around the same time (nothing before or after that has compared in its level of nightmare).

Amen!

It’s doable. I personally run my Jellyfin instance publicly available and there’s maybe 3 people who use it regularly. With my internet connection, WAN side users are limited to about 720p but I’ve had the 3 of us all playing different media at the same time on occasion. The main limiting factors on the number of simultaneously active users is how much upload bandwidth you have and how quickly you can transcode video files. Any 10 year old box will be able to handle 1 or 2 users at a time provided it doesn’t need to do a bunch of transcoding. If your building a box, would use a 11th or 12 gen Intel or if you must go AMD, have a graphics card to handle the transcoding. The “build a box” route can probably handle 4 or 5 simultaneous users, possibly more depending on your hardware choices. The main limiting factor in that case would be your upload.

Didn’t read the article and I haven’t really used Android in a almost a decade, but aren’t most android devices on seriously old versions and sold with 2GB RAM or less. Or are shit Android devices less common nowadays?

Last time I seriously considered an Android device was 8ish years ago and devices running Android 2 were still being sold new.

Its a bot account. It also seems to have at least 15 Lemmy accounts. I’ve just started blocking them.

What’s your utilization? On how many cores?

Starting blind, I’d start with cleaning the case, fans and heat sinks with compressed air (canned is fine, do it outside). Dust builds up, and prevents proper cooling. DO NOT LET THE FANS SPIN WHILE CLEANING THEM, the reverse current will damage your system.

Check for any failed fans.

After that, changing the thermal paste might help depending on how well or how long ago it was applied originally. Paste is cheap so no need to be stingy. Generally lasts about 5 years before beginning to degrade.

Dig long ago dug its grave. Then Reddit jumped in too. Long live Lemmy.

I’ve always used NameCheap. Can’t speak to their ethics, but customer support has been excellent the few times I’ve needed it.

Before I grew enough spare capacity at home to self host our family’s server, I was using MCPro hosting. It was fine and at the time, cheap. I understand they’ve been bought by Apex now though. No experience with them.

Not OP but if I had to guess, probably Turnkey File Server.

When I was first playing with NC I was using a RPi3 with an external SSD for a drive. Performance was pretty good, but as soon as I tried the same setup in a VM, the performance tanked. The only way I found to avoid the performance penalty was a manual install like it was bare metal, which I didn’t really want to do. My experience with such setups is that they tend to be brittle.

My understanding was that the performance penalty was caused by the chain of VMs. Proxmox --> Ubuntu VM --> Docker. I don’t know enough about it to say for sure.

My NextCloud is running on an old desktop that’s been repurposed into a server. The server is running Proxmox, and NC is running in docker directly on Proxmox using the nextcloud-aio image.

Found that had better performance than running it in a VM and was less headaches than the other install options.

I keep thinking about moving it to dedicated hardware, say some sort of mini pc, but it hasn’t been a high priority for me.

Really obscure stuff can be a bit of needle in a haystack. Some places you can try are Archive.org, YouTube, Usenet, and bittorrent (I have good luck on Pirate Bay, but YMMV).