• 0 Posts
  • 46 Comments
Joined 2 years ago
cake
Cake day: June 21st, 2023

help-circle


  • I’m not trying to invalidate anything of your experiences . I mentioned my printers as an example of printing a ton of petg on a cheap printer. I have no experience with your printer specifically, I was just trying to say that it is possible to print petg on a cheap printer but undoubtedly there are similar stories as yours on the same printer I had success with.

    I also didn’t mean that your printer was broken or couldn’t print anything, but if the petg temp was right on the edge of the max set in firmware and the hot end drifts too much, it’s going to trigger a shutdown. The drift in temp could be bad PID tuning or even a lose connection. If that were the case you would be able to print PLA just fine because the drift wouldn’t exceed the max temp and trigger a shutdown.


  • JiveTurkey@lemmy.worldto3DPrinting@lemmy.worldDishwasher and PLA create art
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    1 month ago

    Ive definitely gone through periods of hating petg just because it’s sticky and in my experience any amount of over extrusion results in it building up on the nozzle. It sounds like something may have been wrong with your printer. Shutting down from the hotend being too hot is odd unless that printer specifically has a low max temp or the hotend was doing something to trigger a shutdown. I have 2 voron printers now but I printed all of the parts for the first one out of petg on an ender 3 V2 without issue.


  • JiveTurkey@lemmy.worldtoMemes@lemmy.mlThe Democrats theatre
    link
    fedilink
    arrow-up
    14
    arrow-down
    3
    ·
    1 month ago

    More than hold ping pong paddles with the word false written on them. With the exception of a select few, they’re all basically wet blankets. Let’s see some civil disobedience, let’s see someone getting arrested for standing up for what’s right? Best they can do is ping pong paddles?






  • Roughly 50.1% but that’s still assuming none of these people would’ve switched to trump and this is how US elections work. Based on how things work Donald won the popular vote with less than 50%. I’m not saying it’s the best way but it’s also not like we suddenly switched up the rules. I assure you that I’m just as mad as you are about the system we have but when I look around no one honestly wants to do anything but complain about the way things are instead of being the change they expect to see. A president isn’t going to fix our problems. If people cared more about taking back the power and less about consuming we might see some real change. The only thing that matters in this country is money and despite all the complaints we just can’t seem to stop giving the ass holes running the show more of our money in one form or another.